It’s a cold morning. The air in your bedroom has yet to be warmed. The floor is icy to the touch. Yet all you have to do is make it to the shower, and you can stand there soaking in the warmth.

Nothing feels better than a warm stream of water working its magic to warm you up for the day. That’s why in many cases, shower options are becoming more elaborate. You can find multi-head shower fixtures, rainfall showerheads, and much more at your local hardware store; everything to make your dream shower a reality.

But is a dream shower a good idea? Water conservation is a big deal; and according to recent headlines, baths could be more eco-friendly than a shower.

How To Give Your Shower More Power Without Wasting Water

According to studies, the average eight minute shower will use around 17 gallons of water. The average bath uses around 21 gallons.

And of course, this is where variables come in to play. How full do you fill the tub? How large is the tub? Are you using a water wise showerhead? Are you taking a power shower?

But no matter what choices you make, there are ways to reduce your water usage while enjoying your shower too.

Start with a clean showerhead

As you use your showerhead over and over again, build up from mineral deposits in the water occur. Instead of using harsh chemicals to remove the deposits, use an eco-friendlier cleaner of white vinegar instead. If you remove the showerhead, you can submerge it in a bucket of white vinegar for a couple of hours until the mineral deposits can be rinsed away. Or if you choose not to remove the showerhead, fill a small plastic bag with white vinegar and pull up over the showerhead and secure with a rubber band, hair tie, or other fastener. Leave on overnight, then turn the water on and rinse away the remaining mineral deposits. Either way you’ll bring your showerhead back to new-like condition.

Look for low flow showerhead options

Just because you choose to save water doesn’t mean you can’t enjoy your shower too. Next time you are at your local hardware store, head down the bath aisle and browse through your options. Because today’s manufacturers know people demand both high quality shower options that save water too, there are many different options to choose from. You can also talk with your local plumber, who can share ideas of manufacturers that aren’t in your common, neighborhood big box stores.

Multiple Showerheads doesn’t mean more water

Since 1992, federal regulations have required that showerheads deliver no more than 2.5 gallons of water per minute. Some companies sidestepped the regulation by interpreting it to mean 2.5 gallons per showerhead, so the solution to more power was to have more streams. In 2010, these regulations were updated to say that a showerhead, no matter how many sprays, nozzles or openings it uses, cannot exceed 2.5 gallon per minute in total. So if you want to update your bathroom and a multi showerhead shower is on your top wish list, install it knowing you will still meet today’s water conservation limits.